FFConfigLite

Ford Focus 2 and C-Max I Module Diagnostics and Configuration

Connect your Ford Focus 2 or C-Max using an ELM327 or ELS27 interface to access and interact with the following CAN-bus modules:

Engine Control Module (ECM): Retrieve module information, read diagnostic trouble codes (DTCs), clear codes, reboot the module, and reset the long-term fuel trim (KAM)*. Supported ECUs include: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).

Instrument Panel Cluster (IPC): Access module information, read DTCs, clear codes, configure the module, reboot the module, change the odometer reading, and perform odometer correction*.

Brake Control Module (BCM): Retrieve module information, read DTCs, clear codes, configure the module, reboot the module, reset DDS calibration, and perform brake bleeding*.

Body Control Module (BCM): Access module information, read DTCs, clear codes, and configure the module*. Reboot functionality is also available.

Airbag Control Module (ACM): Retrieve module information, read DTCs, clear codes, configure the module, reboot the module, and clear crash data*.

Transmission Control Module (TCM): Access module information, read DTCs, clear codes, and reset KAM*.

Climate Control Module (CCM): Retrieve module information, read DTCs, and clear codes.

Audio Control Module: Access module information, read DTCs, clear codes, and obtain the radio code (for M-series modules)*.

*Indicates features available only in the full version of the software.

ELM327 Adapter Modification: For full application functionality and access to additional modules, a slight modification to the ELM327 adapter may be necessary. Instructions can be found here: http://forffclub.narod.ru/index/0-2

ELS27 Interface: The ELS27 interface can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT, use the ELS27 Baudrate utility to set it to 2,000,000.